How to Replace a Heat Strip on Your FoodSaver in 5 Easy Steps

How to Replace a Heat Strip on a FoodSaver

Your FoodSaver is a valuable kitchen appliance that can help you save money and reduce food waste. But if the heat strip on your FoodSaver breaks, you may be wondering how to replace it. Fortunately, replacing a heat strip is a relatively simple task that you can do yourself in just a few minutes.

In this article, we will walk you through the process of replacing a heat strip on a FoodSaver. We will provide step-by-step instructions and images to help you along the way. So if your FoodSaver is in need of a new heat strip, read on!

What You Will Need

To replace the heat strip on your FoodSaver, you will need the following materials:

• A new heat strip (specific to your model of FoodSaver)
• A Phillips head screwdriver
• A pair of pliers
• A rag or towel

Step-by-Step Instructions

1. Unplug the FoodSaver from the power outlet.
2. Remove the lid from the FoodSaver.
3. Locate the heat strip. It is a thin, metal strip that is located on the bottom of the FoodSaver.
4. Use the Phillips head screwdriver to remove the screws that secure the heat strip to the FoodSaver.
5. Carefully remove the old heat strip.
6. Apply a small amount of food-grade silicone sealant to the new heat strip.
7. Position the new heat strip over the old heat strip location.
8. Secure the new heat strip in place with the screws.
9. Replace the lid on the FoodSaver.
10. Plug the FoodSaver back into the power outlet.

Replacing a heat strip on a FoodSaver is a relatively simple task that you can do yourself in just a few minutes. By following the steps in this article, you can have your FoodSaver up and running in no time.

Step	Instructions	Image
1	Unplug the FoodSaver from the outlet.
2	Remove the lid from the FoodSaver.
3	Locate the heat strip on the inside of the FoodSaver.
4	Use a Phillips head screwdriver to remove the screws that hold the heat strip in place.
5	Carefully remove the old heat strip from the FoodSaver.
6	Insert the new heat strip into the FoodSaver.
7	Replace the screws that hold the heat strip in place.
8	Replace the lid on the FoodSaver.
9	Plug the FoodSaver back into the outlet.

How to Replace Heat Strip on Foodsaver?

Tools and Materials Needed

• Foodsaver heat sealer
• Phillips head screwdriver
• Replacement heat strip
• Safety glasses
• Gloves

Step-by-Step Instructions

1. Turn off and unplug the foodsaver heat sealer.
2. Remove the lid from the foodsaver heat sealer.
3. Locate the heat strip. The heat strip is a thin, metal strip that is located on the inside of the lid. It is usually located near the center of the lid.
4. Use the Phillips head screwdriver to remove the screws that hold the heat strip in place. There are usually two screws that hold the heat strip in place.
5. Carefully remove the heat strip from the foodsaver heat sealer. Be careful not to damage the heat strip.
6. Install the new heat strip. Make sure that the new heat strip is properly aligned with the old heat strip.
7. Replace the screws that hold the heat strip in place.
8. Replace the lid on the foodsaver heat sealer.
9. Plug in the foodsaver heat sealer and turn it on.

The heat strip on your foodsaver heat sealer should now be replaced. You can now use your foodsaver heat sealer as normal.

Replacing the heat strip on your foodsaver heat sealer is a relatively simple task that can be completed in a few minutes. By following the steps in this guide, you can easily extend the life of your foodsaver heat sealer.

Here are some additional tips for maintaining your foodsaver heat sealer:

• Clean the heat sealer regularly to prevent food residue from building up.
• Use a foodsaver vacuum sealer bag that is the correct size for the food you are sealing.
• Do not overfill the foodsaver vacuum sealer bag.
• Seal the foodsaver vacuum sealer bag tightly.

By following these tips, you can help to keep your foodsaver heat sealer in good working order for many years to come.

How To Replace Heat Strip On Foodsaver?

The heat strip on a FoodSaver is an important part of the machine that helps to seal bags and create a vacuum. If the heat strip is damaged or broken, it will not be able to do its job properly and you may not be able to use your FoodSaver.

Replacing the heat strip is a relatively simple task that can be completed in a few minutes. However, it is important to follow the steps carefully to avoid damaging the machine.

3. Unplug the foodsaver from the outlet.

Before you begin, it is important to unplug the foodsaver from the outlet. This will prevent you from accidentally getting shocked.

4. Remove the lid from the foodsaver.

To remove the lid, locate the two latches on the front of the machine. Press down on the latches and lift up on the lid. The lid should come off easily.

5. Locate the heat strip.

The heat strip is located on the bottom of the foodsaver. It is a thin, metal strip that is attached to the heating element.

6. Remove the old heat strip.

To remove the old heat strip, use a pair of pliers to gently pry it up from the heating element. Be careful not to damage the heating element.

7. Install the new heat strip.

To install the new heat strip, carefully align it with the heating element and press it down until it is secure.

8. Replace the lid.

To replace the lid, simply line it up with the machine and press down until it snaps into place.

9. Plug the foodsaver back in.

Now that you have replaced the heat strip, you can plug the foodsaver back in and start using it again.

Replacing the heat strip on a FoodSaver is a simple task that can be completed in a few minutes. By following these steps, you can ensure that your FoodSaver is working properly and that you can continue to use it to seal bags and create a vacuum.

How do I know if my heat strip needs to be replaced?

There are a few signs that your heat strip may need to be replaced. These include:

• The foodsaver is not sealing properly.
• The foodsaver is taking longer than usual to seal.
• The foodsaver is making a clicking noise when it seals.
• The foodsaver is smoking or emitting a burning smell.

If you notice any of these signs, it is a good idea to replace the heat strip as soon as possible.

How do I replace the heat strip on my Foodsaver?

1. Unplug the Foodsaver from the power outlet.
2. Remove the lid from the Foodsaver.
3. Locate the heat strip. It is a thin, metal strip that is located on the bottom of the Foodsaver.
4. Remove the screws that hold the heat strip in place.
5. Carefully remove the heat strip from the Foodsaver.
6. Align the new heat strip with the holes in the Foodsaver.
7. Secure the new heat strip in place with the screws.
8. Replace the lid on the Foodsaver.
9. Plug the Foodsaver back into the power outlet.

What type of heat strip do I need for my Foodsaver?

You will need a heat strip that is specifically designed for your model of Foodsaver. You can find the correct heat strip for your model by checking the owner’s manual or by contacting the manufacturer.

How much does a replacement heat strip cost?

The cost of a replacement heat strip will vary depending on the model of Foodsaver and the brand of the heat strip. You can expect to pay anywhere from $10 to $20 for a replacement heat strip.

Where can I buy a replacement heat strip?

You can purchase a replacement heat strip from a variety of retailers, including online retailers, home improvement stores, and appliance stores. You can also contact the manufacturer of your Foodsaver to purchase a replacement heat strip.

In this article, we have discussed how to replace the heat strip on a FoodSaver vacuum sealer. We have provided step-by-step instructions, as well as tips and tricks to help you complete the task successfully. We hope that this information has been helpful, and that you are now able to replace the heat strip on your FoodSaver vacuum sealer with ease.

Here are some key takeaways from this article:

• The heat strip is an important part of the FoodSaver vacuum sealer, as it helps to create a tight seal around the food.
• If the heat strip is damaged or broken, it will not be able to create a proper seal, which could lead to food spoilage.
• Replacing the heat strip is a relatively simple task that can be completed in a few minutes.
• By following the steps in this article, you can easily replace the heat strip on your FoodSaver vacuum sealer and keep your food fresh for longer.