How to Change the Igniter on a Pit Boss Grill in 5 Easy Steps
How to Change the Igniter on a Pit Boss Grill
Your Pit Boss grill is a valuable investment, and it’s important to keep it in good working order. One of the most important parts of a Pit Boss grill is the igniter, which is responsible for starting the fire. If the igniter fails, you won’t be able to use your grill.
Fortunately, changing the igniter on a Pit Boss grill is a relatively simple task that you can do yourself. In this article, we’ll walk you through the process of changing the igniter on a Pit Boss grill. We’ll also provide some tips on how to prevent igniter failure in the future.
So if your Pit Boss grill’s igniter is not working, don’t despair. Just follow these steps, and you’ll be grilling again in no time.
| Step | Instructions | Image |
|---|---|---|
| 1 | Turn off the grill and disconnect the power. |  |
| 2 | Remove the grill grates and firepot. |  |
| 3 | Locate the igniter. It is a small, metal rod with a red wire attached to it. |  |
| 4 | Unscrew the igniter from the firepot. |  |
| 5 | Insert the new igniter into the firepot. |  |
| 6 | Reattach the grill grates and firepot. |  |
| 7 | Turn on the grill and test the igniter. |  |
How To Change The Igniter On A Pit Boss Grill?
This guide will show you how to change the igniter on a Pit Boss grill. The igniter is a small, electronic device that produces a spark to ignite the gas in the grill. If your grill is not igniting, or if the igniter is making a clicking noise but not producing a spark, it may be time to replace the igniter.
Tools and Materials Needed
- Disposable gloves
- Phillips head screwdriver
- Needle-nose pliers
- Replacement igniter
Steps to Remove the Old Igniter
1. Turn off the gas to the grill and disconnect the power cord.
2. Remove the grill grates and the heat diffuser.
3. Locate the igniter. The igniter is a small, metal box with a wire connected to it. It is usually located on the back of the grill, near the burner.
4. Disconnect the wire from the igniter. Use the needle-nose pliers to disconnect the wire from the igniter.
5. Remove the igniter. Use the Phillips head screwdriver to remove the screws that hold the igniter in place.
Steps to Install the New Igniter
1. Place the new igniter in the same location as the old igniter.
2. Secure the igniter with the screws.
3. Reconnect the wire to the igniter. Use the needle-nose pliers to reconnect the wire to the igniter.
4. Replace the grill grates and the heat diffuser.
5. Turn on the gas to the grill and plug in the power cord.
Replacing the igniter on a Pit Boss grill is a relatively simple task that can be completed in just a few minutes. By following these steps, you can keep your grill in good working order and enjoy grilling season all year long.
Here are some additional tips for replacing the igniter on a Pit Boss grill:
- Make sure that you purchase a replacement igniter that is compatible with your grill.
- Be careful not to damage the igniter when you are removing it from the grill.
- Reconnect the wire to the igniter securely. If the wire is not connected properly, the igniter will not work.
- Test the igniter to make sure that it is working properly. Once you have installed the new igniter, turn on the gas to the grill and plug in the power cord. The igniter should produce a spark when you press the button.
How To Change The Igniter On A Pit Boss Grill?
Changing the igniter on a Pit Boss grill is a relatively simple task that can be completed in just a few minutes. However, it is important to follow the steps carefully in order to avoid damaging the grill.
Here are the steps on how to change the igniter on a Pit Boss grill:
1. Gather your tools
Before you begin, you will need to gather the following tools:
- A Phillips head screwdriver
- A Torx T25 screwdriver
- A pair of needle-nose pliers
- A new igniter
2. Turn off the grill and disconnect the power
The first step is to turn off the grill and disconnect the power. This will help to prevent any injuries from occurring.
To turn off the grill, simply flip the power switch to the “Off” position. To disconnect the power, unplug the grill from the outlet.
3. Remove the grill grates
The next step is to remove the grill grates. This will give you access to the igniter.
To remove the grill grates, simply lift them up and off of the grill.
NOTE: If your grill has a grease tray, you will need to remove the grease tray before you can remove the grill grates.
4. Locate the igniter
The igniter is located on the bottom of the grill, near the front. It is a small, rectangular component that is usually black in color.
5. Remove the igniter
To remove the igniter, you will need to use a Phillips head screwdriver to remove the two screws that hold it in place.
Once the screws are removed, you can carefully lift the igniter up and out of the grill.
6. Install the new igniter
To install the new igniter, simply reverse the steps above. First, insert the new igniter into the grill. Then, use a Phillips head screwdriver to secure it in place with the two screws.
7. Test the igniter
Once the new igniter is installed, you will need to test it to make sure that it is working properly.
To test the igniter, simply turn on the grill and press the igniter button. The igniter should glow red and spark.
If the igniter does not glow red or spark, you may need to adjust the position of the igniter or replace it with a new one.
Changing the igniter on a Pit Boss grill is a relatively simple task that can be completed in just a few minutes. By following the steps above, you can easily replace a broken igniter and get your grill back up and running in no time.
How do I know if my igniter needs to be replaced?
There are a few signs that your igniter may need to be replaced, including:
- The grill is not heating up properly.
- The grill is sparking but not igniting the gas.
- The grill is making a clicking noise but not igniting.
- The grill is not producing enough heat.
If you notice any of these signs, it is a good idea to replace the igniter as soon as possible.
How do I remove the old igniter?
1. Turn off the gas to the grill and disconnect the power cord.
2. Remove the grill grates and firebox.
3. Locate the igniter. It is a small, metal rod that is typically located near the bottom of the firebox.
4. Use a pair of pliers to grip the igniter and twist it counterclockwise until it comes loose.
5. Remove the igniter from the grill.
How do I install the new igniter?
1. Align the new igniter with the hole in the firebox.
2. Press the igniter into the hole until it is snug.
3. Replace the grill grates and firebox.
4. Turn on the gas to the grill and plug in the power cord.
5. Test the igniter by turning on the grill and pressing the igniter button. The igniter should spark and the grill should ignite.
What if I have trouble replacing the igniter?
If you are having trouble replacing the igniter, you can contact Pit Boss customer service for assistance. You can also find replacement igniters for Pit Boss grills at most home improvement stores.
Changing the igniter on a Pit Boss grill is a relatively simple task that can be completed in a few minutes. By following the steps outlined in this guide, you can ensure that your grill is operating properly and that you are able to enjoy delicious grilled food for many years to come.
Here are the key takeaways from this guide:
- The igniter is located on the side of the grill, near the control panel.
- To remove the igniter, you will need to disconnect the wires and unscrew the two screws that hold it in place.
- The new igniter should be installed in the same way as the old one.
- Be sure to reconnect the wires before using the grill.
By following these steps, you can easily change the igniter on your Pit Boss grill and keep your grill in top working order.
Author Profile
-
With over 30 years experience, Lucks Caterers is a second generation family owned and operated business. We are committed to maintaining our family tradition of outstanding quality, excellence and reliability.
Our European trained head chef develops beautiful and delicious foods to catch the eye and satisfy the palate. Lucks provides you with imaginative and affordable menu selections.
In 2024, we embarked on a new chapter in our journey as we expanded our horizons to share our wealth of knowledge and expertise with a broader audience. With a keen focus on event management and culinary arts, we launched an informative blog aimed at empowering individuals with the insights and inspiration they need to plan unforgettable events and elevate their culinary skills.
Thank you for considering Lucks Caterers as your partner in culinary excellence. We eagerly anticipate the opportunity to collaborate with you and create unforgettable memories together.